This really is exactly that, an example. Its purpose is to give you a guideline figure for the cost of the work that we do. When quoting we tend to use the example package as a starting point and adjust it according to the individual needs of the client.

Fifteen square metres of tongue & groove timber floorboards.

MDF hinged hatch door fabricated to fit the existing hatch opening

Two part, lightweight loft ladder

Pendant light fitting & switch

£595.00

Please note that we fix pine floorboards to the existing joist work, we do not use 4ft x 1ft or 8ft x 2ft chipboard panels. The former are not of sufficient quality; the latter are very clumsy to work with in peoples homes and therefore more likely to knock a wall or break an ornament!

The floorboards are fixed using a pneumatic nail gun, which eliminates any percussion thereby reducing the possibility of plaster plugs being knocked out on the ceiling below.

Wherever cables cross the joists we notch the joist to accommodate the cable, lay the board over the top and mark the board to indicate that cables lay beneath.

The MDF door will be fitted to the existing hatch opening and a twist catch fitted to secure it in the closed position. All the ladders include a stow pole which is used to operate the twist catch.